Editor for Cricket Captain 2018 (Release)

[weetabixharry]

This is the release thread for the Cricket Captain 2018 Editor. This Editor has now been fully integrated into the Cricket Captain 2018 Scout (please see this link).

Please use this thread to download the latest version of the Editor and to report any issues.

Screenshots:



Quick Tips:

1. Run Cricket Captain 2018.09 and load an Easy difficulty career mode game, or a Tournament game.
2. Run the editor.
3. Only "Load" or "Apply" the Player Editor while viewing that player in-game.
4. Only "Add Coach + Physio" while viewing the Coaching screen in-game.
5. It should be safe to "Load Budget", "Save Budget" and set "100% Squad Fitness" from just about any screen in the game.
6. Only set "Global Settings" when needed, then un-set immediately afterwards. For example, to allow unavailable players to play in a match, set these options before clicking "Play Match", then un-set again after the match screen has loaded.
7. If you change a player's role (batsman, bowler, all-rounder, keeper, opener, etc.) then always exit their profile in-game, then exit the next screen (so the correct team order is regenerated) before editing any other player.
8. I haven't had any issues, but there is always a chance the editor could corrupt your savegame. Back it up if you don't want to risk losing it.

Most of the editor should be self-explanatory. A few of the more complex features display a help message when you hover the mouse over them.

Please check the following FAQ before asking a question. I will update the FAQ with any new questions.

FAQ (PLEASE READ):

• Q: Can I use this editor to cheat online?
• A: No. The editor is not compatible with any game modes eligible for online play. If you try to use the editor in Normal difficulty career mode, then it will crash. It will definitely not work correctly and could corrupt your game. Also, this is a very simple memory editor, so if it did work in multiplayer then it would be easily detected by Steam and your account would be banned.

• Q: Does this editor work with Cricket Captain 2019?
• A: No. This editor only works specifically with Cricket Captain 2018.09. If you have an older version of Cricket Captain 2018, then you must update.

• Q: Do you plan to release an editor for Cricket Captain 2019?
• A: Not currently. If there is high demand, then I will buy the game and update the editor.

• Q: Does the editor run on Mac, Linux or mobile devices?
• A: No. I have tested it in Windows 7 and 10. If there is high demand, then I could look into porting to other platforms.

• Q: Where is the download link?
• A: Click on a version name in the table below.

• Q: How did you write this editor?
• A: The original version was written (in C#) by Fe98 more than a decade ago, based on a huge community effort to reverse-engineer earlier versions of the game. They deserve most of the credit. I have just updated and added features.

• Q: Is the editor finished?
• A: No. There are a lot of features missing (particularly related to batting, bowling and fielding attributes). I need help investigating these attributes using CheatEngine/ArtMoney. If anyone is interested in helping, then I will post a guide on how to help.

Downloads:

Version | Date | Description
2018.09-01 | 04/04/2020 | First public release. Tested in Win7/10. 2018.09-02 | 13/04/2020 | Fixed Windows 10 compatibility issue. 2018.09-03 | 15/04/2020 | Fixed more Win 10 compatibility issues. 2018.09-04 | 27/04/2020 | Added missing nationalities. 2018.09-05 | 02/05/2020 | Improved control over batting order. 2018.09-06 | 09/05/2020 | Added batting and bowling potential. 2018.09-07 | 15/05/2020 | Added stats, added ability randomization. 2018.09-08 | 14/06/2020 | Added non-English domestic contracts. Added "100% Squad Fitness". Added global option for unavailable international players. Stability improvements. 2018.09-09|14/06/2020|Fixed bug in "Other National Contract" box.

 

[bizlabiz]

This is the release thread for the Cricket Captain 2018 Editor.

Please use this thread to download the latest version of the editor and to report any issues.

NOTE: I have tested the editor in Windows 7 and Windows 10. However, if it doesn't load correctly for you, then please download and run this application to display some system info I need to debug the issue. Paste the info in this thread and I will upload a fix.

Screenshots:

View attachment 231057 View attachment 231058

Quick Tips:

1. Run Cricket Captain 2018.09 and load an Easy mode game.
2. Run the editor.
3. Only "Load" or "Apply" the Player Editor while viewing that player in-game.
4. Only "Add Coach + Physio" while viewing the Coaching screen in-game.
5. Only "Load Budget" while viewing the Team Details screen in-game. Confirm your team's name and budget is correctly loaded before editing and hitting "Save Budget".
6. If you change a player's role (batsman, bowler, all-rounder, keeper, opener, etc.) then always exit their profile in-game, then exit the next screen (so the correct team order is regenerated) before editing any other player.
7. I haven't had any issues, but there is always a chance the editor could corrupt your savegame. Back it up if you don't want to risk losing it.

Most of the editor should be self-explanatory. A few of the more complex features display a help message when you hover the mouse over them.

Please check the following FAQ before asking a question. I will update the FAQ with any new questions.

FAQ (PLEASE READ):

• Q: Can I use this editor to cheat online?
• A: No. The editor is only compatible with Easy mode games. If you try to use the editor in Normal mode, then it will crash. It will definitely not work correctly and could corrupt your game. Also, this is a very simple memory editor, so if it did work in multiplayer then it would be easily detected by Steam and your account would be banned.

• Q: Does this editor work with Cricket Captain 2019?
• A: No. This editor only works specifically with Cricket Captain 2018.09. If you have an older version of Cricket Captain 2018, then you must update.

• Q: Do you plan to release an editor for Cricket Captain 2019?
• A: Not currently. If there is high demand, then I will buy the game and update the editor.

• Q: Does the editor run on Mac, Linux or mobile devices?
• A: No. I have tested it in Windows 7 and 10. If there is high demand, then I could look into porting to other platforms.

• Q: Where is the download link?
• A: Click on a version name in the table below.

• Q: How did you write this editor?
• A: The original version was written (in C#) by Fe98 more than a decade ago, based on a huge community effort to reverse-engineer earlier versions of the game. They deserve most of the credit. I have just updated and added features.

• Q: Is the editor finished?
• A: No. There are a lot of features missing (particularly related to batting, bowling and fielding attributes). I need help investigating these attributes using CheatEngine/ArtMoney. If anyone is interested in helping, then I will post a guide on how to help.

Downloads:

+------------+------------+------------------------------------------+
| Version... | Date...... | Description............................. |
+------------+------------+------------------------------------------+
| 2018.09-01 | 04/04/2020 | First public release. Tested in Win7/10. |
+------------+------------+------------------------------------------+

Hi Harry,

Thanks for all your hard work with the editor. It isn't working for me on Windows 10. Here is the debug info:

0x6B 0xD0 0xB5 0x46
0xEA 0xE7 0xC1 0x0B
0xCA 0x20 0x46 0x18
0xF5 0xE9 0xAE 0xD2
0xA7 0xA1 0xA7 0xB1
0x09 0x18 0x29 0x51
0xD9 0x47 0x1E 0xF3
0xEF 0x8C 0x7F 0x08
0xAD 0xF5 0xF5 0x70
0xC1 0xF7 0x57 0x61
0xBE 0x28 0x95 0xC3
0x64 0xF8 0x39 0xCB
0xA7 0xF5 0xC0 0x2F
0x2B 0x7C 0x41 0x7D
0xB4 0xCC 0x81 0x72
0x08 0x24 0xB2 0xA5

I hope that helps.

 

[weetabixharry]

I hope that helps.

Thanks very much. It looks like several people are having the same issue. I'm working on a fix and will update here soon.

 

[weetabixharry]

I'm working on a fix and will update here soon.

@bizlabiz Please download and re-run the updated CricketCaptain2018EditorHelper.exe and copy-paste the new results back here. This updated version analyzes a lot more multi-level pointers and I feel pretty confident that "PATH 4" is going to work for everyone.

Thanks again for your help.

 

[weetabixharry]

It seems like "PATH 4" has worked for some people. Therefore, I have patched the editor and uploaded version 2018.09-02.

@bizlabiz Please check if this latest version works for you.

 

[Prashanth S Kharche]

Hi, worked once but now does not load at all.

Please record this debug info:

[PATH 0]
0x6B 0xD0 0xB5 0x46
0x60 0x6D 0x4B 0x81
0xCB 0x21 0x47 0x19
0xF5 0xE9 0xAE 0xD2
0xA7 0xA1 0xA7 0xB1
0x09 0x18 0x29 0x51
0xDC 0x42 0x1B 0xF6
0xEF 0x8C 0x7F 0x08
0xA8 0xF0 0xF0 0x75
0xC1 0xF7 0x57 0x61
0x8E 0x18 0xA5 0xF3
0x54 0xC8 0x09 0xFB
0x97 0xC5 0xF0 0x1F
0x1B 0x4C 0x71 0x4D
0x84 0xFC 0xB1 0x42
0x08 0x24 0xB2 0xA5

[PATH 1]
0x46 0xB5 0xE4 0x5A
0x0B 0xC1 0xF5 0xD4
0x18 0x46 0x8C 0x95
0xD2 0xAE 0x23 0x8C
0xB1 0xA7 0x26 0xEA
0x51 0x29 0x41 0x49
0xF3 0x1E 0xD7 0xC1
0x08 0x7F 0x41 0xC0
0x70 0xF5 0xD0 0x61
0x61 0x57 0x3E 0x91
0xC3 0x95 0xED 0x13
0xCB 0x39 0x59 0x0D
0x2F 0xC0 0x32 0x87
0x7D 0x41 0x40 0xC7
0x72 0x81 0x9D 0xEF
0xA5 0xB2 0x79 0x21

[PATH 2]
0x91 0x3A 0x42 0x66
0x78 0xE9 0xCC 0x13
0x03 0x27 0x6E 0x3D
0x56 0xD3 0xE9 0x1F
0x29 0x89 0x2E 0x2F
0xCB 0xFF 0x43 0x3D
0x4F 0x14 0x25 0x6A
0x87 0x71 0x22 0x0C
0x2A 0x1B 0xDE 0xE7
0x9A 0xF6 0x94 0xF1
0x43 0x01 0x8C 0x7D
0xA7 0xC6 0x25 0x7D
0xB0 0xD1 0xDA 0x56
0xBF 0xDE 0x9F 0xE6
0x73 0x15 0x59 0x5E
0x15 0x66 0x83 0x1C

[PATH 3]
0xC7 0xA6 0x7C 0x9F
0x63 0xBB 0x6F 0x96
0x3D 0xA5 0x72 0x35
0x67 0x73 0x4E 0x4D
0x18 0x8C 0x82 0x78
0x21 0x4B 0x82 0x3B
0xF1 0xBE 0xD1 0xD8
0xF4 0x30 0xCB 0x31
0x93 0xAF 0xA4 0x39
0x0F 0x2E 0x60 0x2B
0x3C 0x5E 0xCF 0x3A
0x5A 0xA0 0x88 0x6F
0xD2 0xC7 0x59 0x4F
0x03 0x14 0xF0 0xEC
0x0B 0xED 0xE0 0x6E
0x2B 0xC6 0x8C 0x2F

[PATH 4]
0xE7 0x15 0xAD 0x7E
0x70 0xC9 0xEF 0x4D
0x71 0xCC 0x5F 0xB6
0x1C 0x07 0xFC 0xE7
0x42 0xED 0x09 0xE4
0x68 0xBA 0xE2 0x55
0x9D 0x78 0xEC 0xB7
0x43 0x94 0xCB 0x32
0x9F 0x39 0x1C 0x02
0xB6 0x75 0x43 0xBE
0x08 0xC6 0x65 0xB0
0x2E 0xBB 0x9E 0x4A
0x7B 0xB5 0x12 0xD7
0x61 0x0B 0x88 0xAC
0x5C 0x4D 0x2B 0xAE
0x82 0x9F 0xA7 0xDC

[PATH 5]
0xCE 0x85 0x2C 0x5F
0x19 0x92 0xEE 0xB8
0x2F 0xD0 0xD5 0x7C
0x3D 0xD1 0xCD 0x56
0xE2 0xB8 0x0F 0xF3
0x07 0x26 0x66 0xEB
0x78 0xAD 0x83 0x08
0x2A 0x84 0x6A 0xBC
0xFF 0xFC 0xAD 0x41
0xB6 0xA6 0xA0 0x6C
0xB0 0xFC 0x7A 0xBC
0x48 0x44 0x5E 0xC1
0x3F 0x5E 0x33 0x5A
0x9E 0xE3 0xCB 0xCB
0x3A 0x25 0x1A 0x7D
0x12 0x22 0x1B 0xB3

[PATH 6]
0xAA 0x28 0xD3 0x6C
0x00 0x51 0x71 0x92
0xB3 0xA4 0xBB 0x98
0xAA 0x60 0x58 0x78
0x2D 0x30 0x95 0xB2
0x20 0x6D 0x1B 0xB3
0xFA 0x7E 0xED 0xA6
0x2B 0x1E 0xE1 0x08
0x0D 0x93 0xD4 0x14
0x8F 0x39 0x42 0x51
0xD1 0x52 0xA8 0xB7
0x9B 0xA5 0x35 0x97
0x00 0x70 0x5C 0x58
0x6E 0x7A 0x60 0xE1
0x45 0xAD 0x19 0x87
0xFB 0x43 0x2D 0xF7

[PATH 7]
0x88 0xA3 0x9A 0x57
0xD9 0x7F 0xE9 0x11
0x1A 0x3C 0xEB 0x30
0x9C 0xAD 0x00 0xBD
0xC7 0x4A 0x76 0x3E
0x6C 0xAB 0x6C 0xEA
0x12 0xB4 0x70 0x41
0x44 0x11 0xC5 0xC3
0x22 0x44 0x57 0x35
0x47 0x39 0xC8 0x49
0x40 0x9A 0x48 0x27
0xB6 0xE8 0x39 0xA3
0x45 0x68 0x1D 0x9E
0xD0 0xF7 0x88 0xBB
0xB4 0x9C 0x49 0x5C
0xF1 0x01 0x27 0xA4

 

[weetabixharry]

@Prashanth S Kharche Thanks. It looks like several paths are working correctly for you, but not "PATH 4".

I'm not sure why different people are seeing different things. If more people can send the debug info, then hopefully it will be possible to find something that works for everyone.

 

[GronkieCS]

[PATH 0]
0x6A 0xD1 0xB4 0x47
0x60 0x6D 0x4B 0x81
0xCB 0x21 0x47 0x19
0xF5 0xE9 0xAE 0xD2
0xA7 0xA1 0xA7 0xB1
0x09 0x18 0x29 0x51
0xDC 0x42 0x1B 0xF6
0xEF 0x8C 0x7F 0x08
0xA8 0xF0 0xF0 0x75
0xC1 0xF7 0x57 0x61
0x8E 0x18 0xA5 0xF3
0x54 0xC8 0x09 0xFB
0x97 0xC5 0xF0 0x1F
0x1B 0x4C 0x71 0x4D
0x84 0xFC 0xB1 0x42
0x08 0x24 0xB2 0xA5
[PATH 1]
0x46 0xB5 0xE4 0x5A
0x0B 0xC1 0xF5 0xD4
0x18 0x46 0x8C 0x95
0xD2 0xAE 0x23 0x8C
0xB1 0xA7 0x26 0xEA
0x51 0x29 0x41 0x49
0xF3 0x1E 0xD7 0xC1
0x08 0x7F 0x41 0xC0
0x70 0xF5 0xD0 0x61
0x61 0x57 0x3E 0x91
0xC3 0x95 0xED 0x13
0xCB 0x39 0x59 0x0D
0x2F 0xC0 0x32 0x87
0x7D 0x41 0x40 0xC7
0x72 0x81 0x9D 0xEF
0xA5 0xB2 0x79 0x21
[PATH 2]
0x91 0x3A 0x42 0x66
0x78 0xE9 0xCC 0x13
0x03 0x27 0x6E 0x3D
0x56 0xD3 0xE9 0x1F
0x29 0x89 0x2E 0x2F
0xCB 0xFF 0x43 0x3D
0x4F 0x14 0x25 0x6A
0x87 0x71 0x22 0x0C
0x2A 0x1B 0xDE 0xE7
0x9A 0xF6 0x94 0xF1
0x43 0x01 0x8C 0x7D
0xA7 0xC6 0x25 0x7D
0xB0 0xD1 0xDA 0x56
0xBF 0xDE 0x9F 0xE6
0x73 0x15 0x59 0x5E
0x15 0x66 0x83 0x1C
[PATH 3]
0xC7 0xA6 0x7C 0x9F
0x63 0xBB 0x6F 0x96
0x3D 0xA5 0x72 0x35
0x67 0x73 0x4E 0x4D
0x18 0x8C 0x82 0x78
0x21 0x4B 0x82 0x3B
0xF1 0xBE 0xD1 0xD8
0xF4 0x30 0xCB 0x31
0x93 0xAF 0xA4 0x39
0x0F 0x2E 0x60 0x2B
0x3C 0x5E 0xCF 0x3A
0x5A 0xA0 0x88 0x6F
0xD2 0xC7 0x59 0x4F
0x03 0x14 0xF0 0xEC
0x0B 0xED 0xE0 0x6E
0x2B 0xC6 0x8C 0x2F
[PATH 4]
0xE6 0x14 0xAC 0x7F
0x70 0xC9 0xEF 0x4D
0x71 0xCC 0x5F 0xB6
0x1C 0x07 0xFC 0xE7
0x42 0xED 0x09 0xE4
0x68 0xBA 0xE2 0x55
0x9D 0x78 0xEC 0xB7
0x43 0x94 0xCB 0x32
0x9F 0x39 0x1C 0x02
0xB6 0x75 0x43 0xBE
0x08 0xC6 0x65 0xB0
0x2E 0xBB 0x9E 0x4A
0x7B 0xB5 0x12 0xD7
0x61 0x0B 0x88 0xAC
0x5C 0x4D 0x2B 0xAE
0x82 0x9F 0xA7 0xDC
[PATH 5]
0xCF 0x84 0x2D 0x5E
0x19 0x92 0xEE 0xB8
0x2F 0xD0 0xD5 0x7C
0x3D 0xD1 0xCD 0x56
0xE2 0xB8 0x0F 0xF3
0x07 0x26 0x66 0xEB
0x78 0xAD 0x83 0x08
0x2A 0x84 0x6A 0xBC
0xFF 0xFC 0xAD 0x41
0xB6 0xA6 0xA0 0x6C
0xB0 0xFC 0x7A 0xBC
0x48 0x44 0x5E 0xC1
0x3F 0x5E 0x33 0x5A
0x9E 0xE3 0xCB 0xCB
0x3A 0x25 0x1A 0x7D
0x12 0x22 0x1B 0xB3
[PATH 6]
0xAB 0x29 0xD2 0x6D
0x00 0x51 0x71 0x92
0xB3 0xA4 0xBB 0x98
0xAA 0x60 0x58 0x78
0x2D 0x30 0x95 0xB2
0x20 0x6D 0x1B 0xB3
0xFA 0x7E 0xED 0xA6
0x2B 0x1E 0xE1 0x08
0x0D 0x93 0xD4 0x14
0x8F 0x39 0x42 0x51
0xD1 0x52 0xA8 0xB7
0x9B 0xA5 0x35 0x97
0x00 0x70 0x5C 0x58
0x6E 0x7A 0x60 0xE1
0x45 0xAD 0x19 0x87
0xFB 0x43 0x2D 0xF7
[PATH 7]
0x89 0xA2 0x9B 0x56
0xD9 0x7F 0xE9 0x11
0x1A 0x3C 0xEB 0x30
0x9C 0xAD 0x00 0xBD
0xC7 0x4A 0x76 0x3E
0x6C 0xAB 0x6C 0xEA
0x12 0xB4 0x70 0x41
0x44 0x11 0xC5 0xC3
0x22 0x44 0x57 0x35
0x47 0x39 0xC8 0x49
0x40 0x9A 0x48 0x27
0xB6 0xE8 0x39 0xA3
0x45 0x68 0x1D 0x9E
0xD0 0xF7 0x88 0xBB
0xB4 0x9C 0x49 0x5C
0xF1 0x01 0x27 0xA4

 

[GronkieCS]

Editor worked perfectly for me, yesterday/day before. Not working today zzz

 

[weetabixharry]

Editor worked perfectly for me, yesterday/day before. Not working today zzz

Thanks. I'll look into finding a fix and will upload another update soon.

It's a bit tricky when I can't reproduce the problem on my own computer, and different people seem to be seeing different results at different times!

 

[weetabixharry]

Thanks. I'll look into finding a fix and will upload another update soon.

@Prashanth S Kharche
@GronkieCS

I have patched the editor so it should now hopefully work for everyone. Please try downloading version 2018.09-03 and let me know if this works.

 

[GronkieCS]

Works again bud, thank you @weetabixharry

 

[bizlabiz]

It seems like "PATH 4" has worked for some people. Therefore, I have patched the editor and uploaded version 2018.09-02.

@bizlabiz Please check if this latest version works for you.

Thanks, mate. It fails to recognise I'm in a game now unfortunately. I've tried the 03v from above, also.

 

[weetabixharry]

Thanks, mate. It fails to recognise I'm in a game now unfortunately. I've tried the 03v from above, also.

What exactly are the symptoms?

 

[Prashanth S Kharche]

See the end of this message for details on invoking

just-in-time (JIT) debugging instead of this dialog box.


************** Exception Text **************

System.NullReferenceException: Object reference not set to an instance of an object.

at CricketCaptain2018Tools.CricketCaptainEditorForm.l(Object A_0, EventArgs A_1)

at System.Windows.Forms.Control.OnClick(EventArgs e)

at System.Windows.Forms.Button.OnClick(EventArgs e)

at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)

at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)

at System.Windows.Forms.Control.WndProc(Message& m)

at System.Windows.Forms.ButtonBase.WndProc(Message& m)

at System.Windows.Forms.Button.WndProc(Message& m)

at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)

at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)

at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)



************** Loaded Assemblies **************

mscorlib

Assembly Version: 4.0.0.0

Win32 Version: 4.8.4121.0 built by: NET48REL1LAST_C

CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll

----------------------------------------

CricketCaptain2018Editor

Assembly Version: 1.0.0.0

Win32 Version: 1.0.0.0

CodeBase: file:///C:/Users/user/Desktop/CricketCaptain2018Editor.exe

----------------------------------------

System.Windows.Forms

Assembly Version: 4.0.0.0

Win32 Version: 4.8.4121.0 built by: NET48REL1LAST_C

CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll

----------------------------------------

System

Assembly Version: 4.0.0.0

Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C

CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll

----------------------------------------

System.Drawing

Assembly Version: 4.0.0.0

Win32 Version: 4.8.3752.0 built by: NET48REL1

CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll

----------------------------------------

System.Configuration

Assembly Version: 4.0.0.0

Win32 Version: 4.8.3752.0 built by: NET48REL1

CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll

----------------------------------------

System.Core

Assembly Version: 4.0.0.0

Win32 Version: 4.8.4121.0 built by: NET48REL1LAST_C

CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll

----------------------------------------

System.Xml

Assembly Version: 4.0.0.0

Win32 Version: 4.8.3752.0 built by: NET48REL1

CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll

----------------------------------------


************** JIT Debugging **************

To enable just-in-time (JIT) debugging, the .config file for this

application or computer (machine.config) must have the

jitDebugging value set in the system.windows.forms section.

The application must also be compiled with debugging

enabled.


For example:


<configuration>

<system.windows.forms jitDebugging="true" />

</configuration>


When JIT debugging is enabled, any unhandled exception

will be sent to the JIT debugger registered on the computer

rather than be handled by this dialog box.