Test Cricket tweak

I just have one request Ravi, could you re-do the ODI_bowling.exe and change the bowling curosr to a smaller size?
it is currently set too big, it is st at;
TargetSizeMin: 0.500000
TargetSizeMax: 1.300000

change it to this:
TargetSixeMin: 0.800000
TargetSizeMax: 1.200000

thanks B)
 
Originally posted by radaga@Aug 9 2003, 02:53 AM
I just have one request Ravi, could you re-do the ODI_bowling.exe and change the bowling curosr to a smaller size?
it is currently set too big, it is st at;
TargetSizeMin: 0.500000
TargetSizeMax: 1.300000

change it to this:
TargetSixeMin: 0.800000
TargetSizeMax: 1.200000

thanks B)
Ragada, with the above change you have requested the bowling cursor might go invisible for good bowlers. If you have tried this and are sure the bowling cursor might not disappear, I will change it. Otherwise I suggest the following changes :

TargetSixeMin: 0.200000
TargetSizeMax: 0.900000
 
no i have tried it, it works
so would u be able to put it in to the .exe?
 
Originally posted by radaga@Aug 9 2003, 03:24 AM
no i have tried it, it works
so would u be able to put it in to the .exe?
Sure mate, will send this to you by email.
 
Originally posted by crick4life@Aug 9 2003, 03:03 PM
Originally posted by radaga@Aug 9 2003, 03:24 AM
no i have tried it, it works
so would u be able to put it in to the .exe?
Sure mate, will send this to you by email.
Ok kool i'll make sure i free up some space
 
Originally posted by radaga@Aug 9 2003, 07:35 AM
Originally posted by crick4life@Aug 9 2003, 03:03 PM
Originally posted by radaga@Aug 9 2003, 03:24 AM
no i have tried it, it works
so would u be able to put it in to the .exe?
Sure mate, will send this to you by email.
Ok kool i'll make sure i free up some space
Tim, its sent mate.

I have started to play a Test match on a dusty pitch and so far it looks quite good although I havent been get able to break through yet <_< . I am playing as NZ against India a 2 series tie, unfortunately I lost the toss :mellow: and India elected to bat in the first test. So far I have bowled 22 overs and India are 68/0 with Shewaj 34(47) and Bangar 28(85). Looks like I will have bowl for a long time to bowl them out but the spinners are getting a lot of purchase ;) and are being economical. Tell me this, is the Bangar guy still playing for India? I think I am using an old .ctm or something for India, can someone with the latest ones send it to me please.
 
Ravi , in the latest Test match , India played was against NZ and Bangar played as opener.

Dunno , whether he will be there in future series
 
Ravi , in the latest Test match , India played was against NZ and Bangar played as opener.

Dunno , whether he will be there in future series
 
Actually I did'nt had much problems with my own batting . The main problem was on the damp pitch , where NZ ( my opponent ) scored 68 all out in a ODI against me(IND).

Yeah I agree , I played on a dusty pitch against SA which had only Boje as a spinner . But to hell with the CPU AI , they chose him to bowl only 3 ovrs in the whole innings of 78 overs.
Can this problem be overcome that CPU chooses more spinners for dusty pitches and vice versa.
 
I am playing as NZ against India a 2 series tie
Ravi, playing the same series as India..NZ won the toss and batting..will be interesting to compare the results :)
 
Originally posted by crick4life@Aug 9 2003, 07:03 PM
Originally posted by radaga@Aug 9 2003, 07:35 AM
Originally posted by crick4life@Aug 9 2003, 03:03 PM
Originally posted by radaga@Aug 9 2003, 03:24 AM
no i have tried it, it works
so would u be able to put it in to the .exe?
Sure mate, will send this to you by email.
Ok kool i'll make sure i free up some space
Tim, its sent mate.

I have started to play a Test match on a dusty pitch and so far it looks quite good although I havent been get able to break through yet <_< . I am playing as NZ against India a 2 series tie, unfortunately I lost the toss :mellow: and India elected to bat in the first test. So far I have bowled 22 overs and India are 68/0 with Shewaj 34(47) and Bangar 28(85). Looks like I will have bowl for a long time to bowl them out but the spinners are getting a lot of purchase ;) and are being economical. Tell me this, is the Bangar guy still playing for India? I think I am using an old .ctm or something for India, can someone with the latest ones send it to me please.
Ravi, i didn't get it!
try again, space shouldn't be a problem
[email protected]

and also i have a fairly new .ctm, i have attached it, you can use it if you wish
 
Originally posted by radaga@Aug 10 2003, 03:24 AM
Originally posted by crick4life@Aug 9 2003, 07:03 PM
Originally posted by radaga@Aug 9 2003, 07:35 AM
Originally posted by crick4life@Aug 9 2003, 03:03 PM
Originally posted by radaga@Aug 9 2003, 03:24 AM
no i have tried it, it works
so would u be able to put it in to the .exe?
Sure mate, will send this to you by email.
Ok kool i'll make sure i free up some space
Tim, its sent mate.

I have started to play a Test match on a dusty pitch and so far it looks quite good although I havent been get able to break through yet <_< . I am playing as NZ against India a 2 series tie, unfortunately I lost the toss :mellow: and India elected to bat in the first test. So far I have bowled 22 overs and India are 68/0 with Shewaj 34(47) and Bangar 28(85). Looks like I will have bowl for a long time to bowl them out but the spinners are getting a lot of purchase ;) and are being economical. Tell me this, is the Bangar guy still playing for India? I think I am using an old .ctm or something for India, can someone with the latest ones send it to me please.
Ravi, i didn't get it!
try again, space shouldn't be a problem
[email protected]

and also i have a fairly new .ctm, i have attached it, you can use it if you wish
Thanks Ragada, its strange you didnt get it. I am sure I sent it, will send it again right away.
 
Originally posted by Shailesh@Aug 9 2003, 06:27 PM
I am playing as NZ against India a 2 series tie
Ravi, playing the same series as India..NZ won the toss and batting..will be interesting to compare the results :)
It was a test of patience when I bowled. India was finally bowled out for 490 :mellow: in the last session of Day 2. Bangar 110, Gangooly 115*, Dravid 69, Shewag 64 were main contributors. Surprise, surprise Tendulkar got out for 10(15), run out :rolleyes: . Patel 24 and Kumble 34 aided Gangooly in getting to his hundred, thanks to 2 lbws turned down against Gangooly :angry: , 4 edges which were either short or fell in no fieldsman area off Kumble :( , Patel edging couple of times but also got away with it. In all it wasn?t easy to bowl and the run rate was around 3.5 throughout. Guess what, I am struggling on 70/3 :huh: with Astle 28* and McMillan 23* at the crease. Kumble has returned 2/11 and Zaheer snarled the other wicket. Harbhajan Singh hasn?t bowled yet, with spin attack from both ends :blink: it will be a Herculean task to draw this test by the looks of it.
 
i got the bowling.exe now, thanks
is everything the same besides the cursor?
 
Originally posted by radaga@Aug 10 2003, 04:38 AM
i got the bowling.exe now, thanks
is everything the same besides the cursor?
Hopefully it should be the same although I have this habit of tweaking what Ive got on my pc. If anything odd you notice, let me know; I will download the one posted here and add to it the cursor size.

Pathetic batting performance by me :dave: , I was bowled out for 129 :angry: with only Astle 51 and McMillan 25 making scores above 20. Fleming, Cairns, Mcmillan and few others mainly got out because I started to play shots at every ball. I was wrong thinking about winning and tonking as many runs as possible fairly quickly to force win for me. It was easy to defend when batting as the top 6 but the last 4 were simply pathetic, they couldnt buy a run. This time around, I will try to stick around and wear out the bowlers. The game is looking to have only one logical conclusion with my pathetic batting and I cant pray the rain gods as it doesnt rain in Cricket 2002 :P . Ah and Kumble returned 6/18, Zaheer 2/44, Tendulkar 1/26 and Harbhajan 1/7.
 

Users who are viewing this thread

Top